From 044491d896e23e5008ddc9aef1dc97324a7d1714 Mon Sep 17 00:00:00 2001 From: "kujiu (@rincevent)" Date: Sat, 4 May 2024 22:52:12 +0200 Subject: [PATCH] Add gnupg conf with BeID --- desktop/.gnupg/common.conf | 2 + desktop/.gnupg/gnupg-pkcs11-scd.conf | 45 +++++ desktop/.gnupg/gpg-agent.conf | 13 ++ desktop/.gnupg/gpg.conf | 241 +++++++++++++++++++++++++++ desktop/.gnupg/gpgsm.conf | 0 desktop/.gnupg/scdaemon.conf | 9 + 6 files changed, 310 insertions(+) create mode 100644 desktop/.gnupg/common.conf create mode 100644 desktop/.gnupg/gnupg-pkcs11-scd.conf create mode 100644 desktop/.gnupg/gpg-agent.conf create mode 100644 desktop/.gnupg/gpg.conf create mode 100644 desktop/.gnupg/gpgsm.conf create mode 100644 desktop/.gnupg/scdaemon.conf diff --git a/desktop/.gnupg/common.conf b/desktop/.gnupg/common.conf new file mode 100644 index 0000000..4423bf6 --- /dev/null +++ b/desktop/.gnupg/common.conf @@ -0,0 +1,2 @@ +# use-keyboxd + diff --git a/desktop/.gnupg/gnupg-pkcs11-scd.conf b/desktop/.gnupg/gnupg-pkcs11-scd.conf new file mode 100644 index 0000000..7b4ea1b --- /dev/null +++ b/desktop/.gnupg/gnupg-pkcs11-scd.conf @@ -0,0 +1,45 @@ +# Log file. +#log-file log1 + +# Default is not verbose. +#verbose + +# Default is no debugging. +#debug-all + +# Pin cache period in seconds; default is infinite. +#pin-cache 20 + +# Comma-separated list of available provider names. Then set +# attributes for each provider using the provider-[name]-attribute +# syntax. +providers p1 + +# The following attributes can be set for each provider: +# +# library +# Full path to the PKCS#11 shared library (= provider). +# allow-protected-auth +# Allow protected authentication for provider. This needs to be supported by +# the provider and you should have appropriate reader hardware. +# cert-private +# Authentication is required before certificates can be accessed. Most +# configurations store certificates as public, so there is no need to use this +# option. +# private-mask +# Private key mask mode. Use this only when you have problem using +# private key operations. The value is hex encoded mask number. +# 0 Determine automatically. +# 1 Force sign. +# 2 Force sign with recovery. +# 4 Force decrypt. +# 8 Force decrypt with unwrap. +provider-p1-library /usr/lib/x86_64-linux-gnu/pkcs11/beidpkcs11.so +#provider-p1-allow-protected-auth +#provider-p1-cert-private +#provider-p1-private-mask 0 + +#emulate-openpgpg +#openpgp-sign 5 +#openpgp-encr D +#openpgp-auth A diff --git a/desktop/.gnupg/gpg-agent.conf b/desktop/.gnupg/gpg-agent.conf new file mode 100644 index 0000000..6b040a6 --- /dev/null +++ b/desktop/.gnupg/gpg-agent.conf @@ -0,0 +1,13 @@ + +###+++--- GPGConf ---+++### +enable-ssh-support +###+++--- GPGConf ---+++### sam 12 jun 2021 23:37:41 CEST +# GPGConf edited this configuration file. +# It will disable options before this marked block, but it will +# never change anything below these lines. +no-grab +ignore-cache-for-signing +allow-mark-trusted +default-cache-ttl 1800 +scdaemon-program /usr/bin/gnupg-pkcs11-scd +pinentry-program /usr/bin/pinentry diff --git a/desktop/.gnupg/gpg.conf b/desktop/.gnupg/gpg.conf new file mode 100644 index 0000000..a70a524 --- /dev/null +++ b/desktop/.gnupg/gpg.conf @@ -0,0 +1,241 @@ +# Options for GnuPG +# Copyright 1998, 1999, 2000, 2001, 2002, 2003, +# 2010 Free Software Foundation, Inc. +# +# This file is free software; as a special exception the author gives +# unlimited permission to copy and/or distribute it, with or without +# modifications, as long as this notice is preserved. +# +# This file is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY, to the extent permitted by law; without even the +# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +# +# Unless you specify which option file to use (with the command line +# option "--options filename"), GnuPG uses the file ~/.gnupg/gpg.conf +# by default. +# +# An options file can contain any long options which are available in +# GnuPG. If the first non white space character of a line is a '#', +# this line is ignored. Empty lines are also ignored. +# +# See the man page for a list of options. + +# Uncomment the following option to get rid of the copyright notice + +#no-greeting + +# If you have more than 1 secret key in your keyring, you may want to +# uncomment the following option and set your preferred keyid. + +#default-key 6 + +# If you do not pass a recipient to gpg, it will ask for one. Using +# this option you can encrypt to a default key. Key validation will +# not be done in this case. The second form uses the default key as +# default recipient. + +#default-recipient some-user-id +#default-recipient-self + +# Use --encrypt-to to add the specified key as a recipient to all +# messages. This is useful, for example, when sending mail through a +# mail client that does not automatically encrypt mail to your key. +# In the example, this option allows you to read your local copy of +# encrypted mail that you've sent to others. + +#encrypt-to some-key-id + +# By default GnuPG creates version 4 signatures for data files as +# specified by OpenPGP. Some earlier (PGP 6, PGP 7) versions of PGP +# require the older version 3 signatures. Setting this option forces +# GnuPG to create version 3 signatures. + +#force-v3-sigs + +# Because some mailers change lines starting with "From " to ">From " +# it is good to handle such lines in a special way when creating +# cleartext signatures; all other PGP versions do it this way too. + +#no-escape-from-lines + +# If you do not use the Latin-1 (ISO-8859-1) charset, you should tell +# GnuPG which is the native character set. Please check the man page +# for supported character sets. This character set is only used for +# metadata and not for the actual message which does not undergo any +# translation. Note that future version of GnuPG will change to UTF-8 +# as default character set. In most cases this option is not required +# as GnuPG is able to figure out the correct charset at runtime. + +#charset utf-8 + +# Group names may be defined like this: +# group mynames = paige 0x12345678 joe patti +# +# Any time "mynames" is a recipient (-r or --recipient), it will be +# expanded to the names "paige", "joe", and "patti", and the key ID +# "0x12345678". Note there is only one level of expansion - you +# cannot make an group that points to another group. Note also that +# if there are spaces in the recipient name, this will appear as two +# recipients. In these cases it is better to use the key ID. + +#group mynames = paige 0x12345678 joe patti + +# Lock the file only once for the lifetime of a process. If you do +# not define this, the lock will be obtained and released every time +# it is needed, which is usually preferable. + +#lock-once + +# GnuPG can send and receive keys to and from a keyserver. These +# servers can be HKP, email, or LDAP (if GnuPG is built with LDAP +# support). +# +# Example HKP keyserver: +# hkp://keys.gnupg.net +# hkp://subkeys.pgp.net +# +# Example email keyserver: +# mailto:pgp-public-keys@keys.pgp.net +# +# Example LDAP keyservers: +# ldap://keyserver.pgp.com +# +# Regular URL syntax applies, and you can set an alternate port +# through the usual method: +# hkp://keyserver.example.net:22742 +# +# Most users just set the name and type of their preferred keyserver. +# Note that most servers (with the notable exception of +# ldap://keyserver.pgp.com) synchronize changes with each other. Note +# also that a single server name may actually point to multiple +# servers via DNS round-robin. hkp://keys.gnupg.net is an example of +# such a "server", which spreads the load over a number of physical +# servers. To see the IP address of the server actually used, you may use +# the "--keyserver-options debug". + +keyserver hkp://keys.gnupg.net +#keyserver mailto:pgp-public-keys@keys.nl.pgp.net +keyserver ldap://keyserver.pgp.com +keyserver hkp://keyserver.ubuntu.com + +# Common options for keyserver functions: +# +# include-disabled : when searching, include keys marked as "disabled" +# on the keyserver (not all keyservers support this). +# +# no-include-revoked : when searching, do not include keys marked as +# "revoked" on the keyserver. +# +# verbose : show more information as the keys are fetched. +# Can be used more than once to increase the amount +# of information shown. +# +# use-temp-files : use temporary files instead of a pipe to talk to the +# keyserver. Some platforms (Win32 for one) always +# have this on. +# +# keep-temp-files : do not delete temporary files after using them +# (really only useful for debugging) +# +# http-proxy="proxy" : set the proxy to use for HTTP and HKP keyservers. +# This overrides the "http_proxy" environment variable, +# if any. +# +# auto-key-retrieve : automatically fetch keys as needed from the keyserver +# when verifying signatures or when importing keys that +# have been revoked by a revocation key that is not +# present on the keyring. +# +# no-include-attributes : do not include attribute IDs (aka "photo IDs") +# when sending keys to the keyserver. + +keyserver-options auto-key-retrieve + +# Display photo user IDs in key listings + +# list-options show-photos + +# Display photo user IDs when a signature from a key with a photo is +# verified + +# verify-options show-photos + +# Use this program to display photo user IDs +# +# %i is expanded to a temporary file that contains the photo. +# %I is the same as %i, but the file isn't deleted afterwards by GnuPG. +# %k is expanded to the key ID of the key. +# %K is expanded to the long OpenPGP key ID of the key. +# %t is expanded to the extension of the image (e.g. "jpg"). +# %T is expanded to the MIME type of the image (e.g. "image/jpeg"). +# %f is expanded to the fingerprint of the key. +# %% is %, of course. +# +# If %i or %I are not present, then the photo is supplied to the +# viewer on standard input. If your platform supports it, standard +# input is the best way to do this as it avoids the time and effort in +# generating and then cleaning up a secure temp file. +# +# If no photo-viewer is provided, GnuPG will look for xloadimage, eog, +# or display (ImageMagick). On Mac OS X and Windows, the default is +# to use your regular JPEG image viewer. +# +# Some other viewers: +# photo-viewer "qiv %i" +# photo-viewer "ee %i" +# +# This one saves a copy of the photo ID in your home directory: +# photo-viewer "cat > ~/photoid-for-key-%k.%t" +# +# Use your MIME handler to view photos: +# photo-viewer "metamail -q -d -b -c %T -s 'KeyID 0x%k' -f GnuPG" + +# Passphrase agent +# +# We support the old experimental passphrase agent protocol as well as +# the new Assuan based one (currently available in the "newpg" package +# at ftp.gnupg.org/gcrypt/alpha/aegypten/). To make use of the agent, +# you have to run an agent as daemon and use the option +# +# For Ubuntu we now use-agent by default to support more automatic +# use of GPG and S/MIME encryption by GUI programs. Depending on the +# program, users may still have to manually decide to install gnupg-agent. + +use-agent + +# which tries to use the agent but will fallback to the regular mode +# if there is a problem connecting to the agent. The normal way to +# locate the agent is by looking at the environment variable +# GPG_AGENT_INFO which should have been set during gpg-agent startup. +# In certain situations the use of this variable is not possible, thus +# the option +# +# --gpg-agent-info=::1 +# +# may be used to override it. + +# Automatic key location +# +# GnuPG can automatically locate and retrieve keys as needed using the +# auto-key-locate option. This happens when encrypting to an email +# address (in the "user@example.com" form), and there are no +# user@example.com keys on the local keyring. This option takes the +# following arguments, in the order they are to be tried: +# +# cert = locate a key using DNS CERT, as specified in RFC-4398. +# GnuPG can handle both the PGP (key) and IPGP (URL + fingerprint) +# CERT methods. +# +# pka = locate a key using DNS PKA. +# +# ldap = locate a key using the PGP Universal method of checking +# "ldap://keys.(thedomain)". For example, encrypting to +# user@example.com will check ldap://keys.example.com. +# +# keyserver = locate a key using whatever keyserver is defined using +# the keyserver option. +# +# You may also list arbitrary keyservers here by URL. +# +# Try CERT, then PKA, then LDAP, then hkp://subkeys.net: +#auto-key-locate cert pka ldap hkp://subkeys.pgp.net diff --git a/desktop/.gnupg/gpgsm.conf b/desktop/.gnupg/gpgsm.conf new file mode 100644 index 0000000..e69de29 diff --git a/desktop/.gnupg/scdaemon.conf b/desktop/.gnupg/scdaemon.conf new file mode 100644 index 0000000..87855cc --- /dev/null +++ b/desktop/.gnupg/scdaemon.conf @@ -0,0 +1,9 @@ + +###+++--- GPGConf ---+++### +# disable-ccid +disable-ccid +ctapi-driver /usr/lib/x86_64-linux-gnu/pkcs11/beidpkcs11.so +###+++--- GPGConf ---+++### mer 30 jun 2021 14:39:33 CEST +# GPGConf edited this configuration file. +# It will disable options before this marked block, but it will +# never change anything below these lines.