diff --git a/README.dbk b/README.dbk
new file mode 100644
index 0000000..37945e4
--- /dev/null
+++ b/README.dbk
@@ -0,0 +1,108 @@
+
+
+
+
+ Lithophane Lantern
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+ These files are under EUPL-1.2 license. You can use them as is,
+ without any guarantee.
+
+
+ The 100Ω resistor must be adapted in function of your WS2812 strip
+ and your level shifter board.
+
+
+ Each lithophane panel is 108x78mm including 4mm border and 3mm
+ thickness. Do not forget to create positive images, not negative
+ ones. You can use
+ 3dp.rocks
+ service to create your own lithophane plates. The lantern can
+ be printed with 5% infill but lithophane plates must be 100% infill
+ and vertically printed. You can print several lithophanes at the
+ same time with border on bed to avoid grip issues.
+
+
+ You need :
+
+
+
+
+ 2
+ push buttons;
+
+
+
+
+ 1
+ power button;
+
+
+
+
+ 1
+ WS2812 strip (cut four strips of three leds for each
+ lantern);
+
+
+
+
+ 1
+ D1 Mini;
+
+
+
+
+ 1 level shifter (sorry, I lost the link...);
+
+
+
+
+ 2 resistors of 1kΩ;
+
+
+
+
+ 1 resistor of 100Ω (must be changed in function of strip and
+ level shifter);
+
+
+
+
+ 1 capacitor of 1000µF;
+
+
+
+
+ 1
+ barrel connector;
+
+
+
+
+ 1
+ power supply 5V >2A.
+
+
+
+
+ Install ESP8266 boards in your Arduino software and WS2812FX
+ library.
+
+
diff --git a/README.rst b/README.rst
deleted file mode 100644
index 11e956e..0000000
--- a/README.rst
+++ /dev/null
@@ -1,38 +0,0 @@
-Lithophane Lantern
-==================
-
-.. image:: img/build_with_light.jpg
- :alt: The lithophane lantern with light on
-
-.. image:: img/build_off.jpg
- :alt: The lithophane lantern with light off
-
-These files are under EUPL-1.2 license. You can use them as is, without
-any guarantee.
-
-The 100Ω resistor must be adapted in function of your WS2812 strip
-and your level shifter board.
-
-Each lithophane panel is 108x78mm including 4mm border and 3mm thickness.
-Do not forget to create positive images, not negative ones. You can use
-`3dp.rocks service `_ to create your own
-lithophane plates. The lantern can be printed with 5% infill but
-lithophane plates must be 100% infill and vertically printed. You can
-print several lithophanes at the same time with border on bed to avoid
-grip issues.
-
-You need :
-
-- `2 push buttons `_;
-- `1 power button `_;
-- `1 WS2812 strip `_
- (cut four strips of three leds for each lantern);
-- `1 D1 Mini `_;
-- 1 level shifter (sorry, I lost the link...);
-- 2 resistors of 1kΩ;
-- 1 resistor of 100Ω (must be changed in function of strip and level shifter);
-- 1 capacitor of 1000µF;
-- `1 barrel connector `_;
-- `1 power supply 5V >2A `_.
-
-Install ESP8266 boards in your Arduino software and WS2812FX library.