diff --git a/README.dbk b/README.dbk
deleted file mode 100644
index 37945e4..0000000
--- a/README.dbk
+++ /dev/null
@@ -1,108 +0,0 @@
-
-
-
-
- Lithophane Lantern
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
- These files are under EUPL-1.2 license. You can use them as is,
- without any guarantee.
-
-
- The 100Ω resistor must be adapted in function of your WS2812 strip
- and your level shifter board.
-
-
- Each lithophane panel is 108x78mm including 4mm border and 3mm
- thickness. Do not forget to create positive images, not negative
- ones. You can use
- 3dp.rocks
- service to create your own lithophane plates. The lantern can
- be printed with 5% infill but lithophane plates must be 100% infill
- and vertically printed. You can print several lithophanes at the
- same time with border on bed to avoid grip issues.
-
-
- You need :
-
-
-
-
- 2
- push buttons;
-
-
-
-
- 1
- power button;
-
-
-
-
- 1
- WS2812 strip (cut four strips of three leds for each
- lantern);
-
-
-
-
- 1
- D1 Mini;
-
-
-
-
- 1 level shifter (sorry, I lost the link...);
-
-
-
-
- 2 resistors of 1kΩ;
-
-
-
-
- 1 resistor of 100Ω (must be changed in function of strip and
- level shifter);
-
-
-
-
- 1 capacitor of 1000µF;
-
-
-
-
- 1
- barrel connector;
-
-
-
-
- 1
- power supply 5V >2A.
-
-
-
-
- Install ESP8266 boards in your Arduino software and WS2812FX
- library.
-
-
diff --git a/README.rst b/README.rst
new file mode 100644
index 0000000..11e956e
--- /dev/null
+++ b/README.rst
@@ -0,0 +1,38 @@
+Lithophane Lantern
+==================
+
+.. image:: img/build_with_light.jpg
+ :alt: The lithophane lantern with light on
+
+.. image:: img/build_off.jpg
+ :alt: The lithophane lantern with light off
+
+These files are under EUPL-1.2 license. You can use them as is, without
+any guarantee.
+
+The 100Ω resistor must be adapted in function of your WS2812 strip
+and your level shifter board.
+
+Each lithophane panel is 108x78mm including 4mm border and 3mm thickness.
+Do not forget to create positive images, not negative ones. You can use
+`3dp.rocks service `_ to create your own
+lithophane plates. The lantern can be printed with 5% infill but
+lithophane plates must be 100% infill and vertically printed. You can
+print several lithophanes at the same time with border on bed to avoid
+grip issues.
+
+You need :
+
+- `2 push buttons `_;
+- `1 power button `_;
+- `1 WS2812 strip `_
+ (cut four strips of three leds for each lantern);
+- `1 D1 Mini `_;
+- 1 level shifter (sorry, I lost the link...);
+- 2 resistors of 1kΩ;
+- 1 resistor of 100Ω (must be changed in function of strip and level shifter);
+- 1 capacitor of 1000µF;
+- `1 barrel connector `_;
+- `1 power supply 5V >2A `_.
+
+Install ESP8266 boards in your Arduino software and WS2812FX library.